|
|
|
Bar
Style System
|
Assembled handlebars/control
systems feature concealed reservoirs, wires, cables, and hoses while
maintaining standard functions at your fingertips. Choose from
several different styles of 1-1/4" bars and grips.
~ Everything you need in one
complete package ~
Systems available for hydraulic
or mechanical clutch applications. Clean, reliable, and built to the
highest standards with the kind of pride only found in the USA.
The system is shipped
pre-wired, plumbed, and ready to bolt on your triple tree. All you
have to do is the bottom end, bleed the brake, clutch and hook up the
throttle cables.
|
|
Bike Lifts
|
New
All Aluminum
bike Lift
Capacity:
1000 lbs,
Table Size: 200X60cm
Lift height: 25cm~80cm
|
|
Cylinder
Heads
 |
Brand New! 1340
CYLINDER HEADS SCREAMIN' Built right at the
factory for unparalleled quality. The re-designed combustion
chamber, optimized for flow and efficiency, works with stock or
Hi-Compression Forged Piston Kits. Heads come up with larger than
stock 1.898" intake valves and 1.623" exhaust valves.
Valve Spring Kit P/N 18223-98 is used and can accommodate .520"
valve lift. At 72cc, this equates to a 9.5:1 compression ratio
with stock pistons. Use of Screamin' Eagle Spark Plugs P/N
32320-91 when flat-top pistons are used or P/N 32321-91 with high
compression pistons is recommended. 50-state legal for '93-'99
models when used with Original Equipment pistons, air cleaner, cam,
exhaust, and ignition. '84-'92 models require Threaded Cylinder
Head Inserts P/N 29304-92. Fits '84-later carbureted Evolution
1340-equipped models. May also be used on '84-later EFI Evolution
1340-equipped models in conjunction with an approved ECM
calibration.
See your dealer for details.
|
|
Kits
 |
Kits includes: threaded
inserts, chrome nuts, chrome washers, polyurethane bushings and
7/8" OD hollow riser bolts for internal lines
Fits: 1 1/4"
handlebars with a .090 wall
|
|
|
|
Departments
